how to save a project in scrivener – Read First Chapter.com

Scrivener – Setting Up the Project Settings-Options – 2

scrivener-new-project-emptyScrivener comes with certain default settings.  Most of them are fine, as is, but you may want to change the font of certain items and things to make working in the project more comfortable.

For example, I prefer Times New Roman size 16 or 18 px.  I find when writing, this causes much less eye strain.  When the project gets closer to finished, I can go back and change the “compile” settings to Times New Roman 12px for actual upload to KDP.Amazon.com or for upload to a paperback template.

SETTING UP THE PROJECT SETTINGS/OPTIONS:

scrivener-meta-data-project-properties-db

The graphic above is where you need to be in order to change the Project Properties.  How to get there?  Click on Document => Meta-Data Settings => Project Properties Tab.  This will bring up the screen above.

Project Title will be one you fill in as well as Project Abbreviated Title.  For example:  The first book in my series is called Groomed for Marriage.  So I would fill in Groomed for Marriage in the top box and then for abbreviated, I would fill in Groomed.  You can also fill in your full author name, and then the last two boxes are to put in the first and last names separately.  This information is where the project will pull the Book Name and Author Name from.

I ignore the labels section and I don’t work with draft vs. final copy, I just work in a draft until I’m ready to compile.  So if you are a newbie, just leave those settings as is.

We will be addressing the Custom Meta-Data, but it will be more understandable later in the instructions.

scroll-black-scroll-on-trans

COMPILE OPTIONS AND SETUP:

scrivener-compile-first-screen

Click on File => Compile to get the dialog box pictured above.  This box allows you to make lots of changes.  I will start with a list of them and a brief discussion of what they change.

CONTENT:  This tells the Project what to include in your project and whether to follow other formatting instructions or upload/print as is.  So as a newbie, you won’t have much that shows up in this box until you start actually creating new files, so you can leave them as seen in the graphic above.  These settings will serve you well as a new scrivener user.

SEPARATORS:  This allows you to add a pound sign or you can add a few pound signs.  My advice for newbies is to remove this as it can get very tricky as you are working to have separators being automatically put in because you will be making many, many changes to your book and you don’t want to worry about having to remember to take these out or add them.  So until you get ready to upload to KDP.amazon.com or deliver to a publisher, do yourself a favor and forget the separators.

FORMATING:  This formatting can get very tricky.  I’ll try to explain this in the simplest terms.  This area tells Scrivener where it will be pulling it’s files from.  Just make sure “text” is selected in the second and third lines”.  You won’t need to know anything else for right now, but if you want a better explanation, the scrivener user in this video makes it very understandable:

TRANSFORMATIONS: – Ignore this
REPLACEMENTS: – Ignore this for now
FOOT NOTES/COMMENTS: – If you will be adding footnotes and/or comments, you will need to fill out these options.
PAGE SETTINGS:  These have to do with your headers and things, so you can work with the defaults, but this is also covered in the video below.

Next we will cover changing the “Tool Options”.

Scrivener – Opening a New Project 1

scrivener-iconSo now you have downloaded Scrivener , it’s time to talk about how to create a project.  Whether you are using Scrivener to write an eBook, a novel or keeping track of your blog posts, everything begins as a new project.

Once you double-click on the Scrivener icon, it will open up the program in a neutral state if you have not created a project yet, or it may, by default, open your last project.  I would suggest leaving this setting as is, because you will tend to work on one project for awhile and it makes things easier when it open to where you left off.

scrivener-new-project-pane

I suggest you open a Blank project rather than opening one of the templates. and let me explain why.  As a newbie, I selected the fiction book and wound up having to fight against everything that was put into the folders.  It made things all the more confusing.

It had a folder called “front matters” that I never heard of before.  I know what front matters is today, but I still prefer to set things up my own way.  So to keep it simple, just open a Blank project.  That selection is in the left-hand column.

In order to get the dialog box above, click on File => New Project.  This dialog box opens, and then you select Blank.

Once it opens, it will look like the graphic below.

scrivener-new-project-empty

HOW SCRIVENER FILES YOUR WORK:

For each new project you create, Scrivener creates a Folder with the name of your project.  The actual scrivener file is inside.

HOW TO USE SCRIVENER:

Below is a snapshot from the novel I’m presently writing.  I will identify the sections to give you an overview of how I set things up.

Scrivener-sections-one-to-four

  1.  On the left hand side, each new document is a single scene.  I arrange them into Parts 1 to 4.  I follow the 4 part story structure.  In the early stages of writing, I name the scenes with a few words that will let me know what is happening.  For example:  Interview with Husband.
  2. The middle section is where the actual writing of the novel draft takes place.  Each scene begins with an outline that records the Point of View (POV), the time, location and purpose and clues dropped.
  3. Once the scene is completely drafted, I put a summary in the Synopsis section on the upper right hand side.  This allows me to know what happened in the scene in as few words as possible.
  4. The last section, on the lower right hand side is the Notes section.  Before I begin writing the draft, I copy and paste my scene outline into the Notes box so I have it in case I need to trace the roots of anything.  I usually don’t need it, but I’m leery of deleting things.

HOW TO CREATE NEW SCENE FILES:

You can either click on the green plus sign on the upper menu and choose “new file” or you can click control N and it will put in a new file under the one you are presenting in.

HOW THE SCENE EVOLVE:

Once I finish the first draft, I begin my 8 layers of writing and proofreading.  Around Layer 7 or 8, it’s time to change the names of the scenes to actual Chapter names.  I combine scenes into chapters and when I’m done, the book is now in Chapters with multiple scenes.

There’s a lot that goes on between the first draft and compiling into Microsoft Word, which is where I handle the formatting of the books.   I think as newbies, it helps to know how things evolve.

HOW TO SAVE YOUR PROJECT:

Click on File => Save As and this will throw up a dialogue box and you can choose where you want to save your project.  If you have created a Book1 Folder, then save your first Scrivener project into that folder.

NEWBIE TIP:  Be sure to choose File => Save as and not File => Save because the program will save your project to a file inside your scrivener folder or somewhere else that you may have to hunt down.

Now you have a new Scrivener Project started, named, and saved to a place where you will be able to find it!   Next we will talk about the options or properties of the project.

If you would like to see more blog posts on Writing in Scrivener, click here.

I also have a few Scrivener videos on YouTube you may like:

If you would like to download Scrivener, I would appreciate it if you used my affiliate link.  Every little bit helps me keep doing blog posts and videos.